Bandwidth and slew-rate limits for signal conditioning
The TLV4333IPWR: Gain-bandwidth product is 350 kHz, with a slew rate of 0.16 V/µs. This combination suits low-frequency sensor conditioning — thermocouple amplifiers, strain-gauge bridges, photodiode front-ends — but the limited slew rate will distort signals above a few kilohertz at full output swing. For a 1 V peak-to-peak output, the full-power bandwidth is roughly 25 kHz; beyond that, the output rise time becomes the limiting factor. Input bias current is 70 pA typical, low enough for high-impedance sources like pH electrodes or transimpedance amplifiers with feedback resistors in the megaohm range. The zero-drift topology also reduces 1/f noise, which is the dominant noise source below 10 Hz in conventional amplifiers.
Package, supply, and compliance
Lifecycle status is Active with no NRND or EOL flags from Texas Instruments. ROHS3 compliant — no exemptions that would restrict use in EU or global markets.