Skip to main content
Texas Instruments TLV4112CDR — Logic ICs
Texas Instruments

TLV4112CDR Dual Rail-to-Rail Op-Amp, 2.7 MHz, 320 mA Output

MPNTLV4112CDR
End of Life

Texas Instruments TLV4112CDR, General Purpose Dual Op-Amp, 2.7 MHz GBW, 1.57 V/µs Slew Rate, Rail-to-Rail Output, 320 mA per Channel, 2.5 V to 6 V Supply, 8-SOIC, 0°C to 70°C.

$1.2Ref. price · indicative, final on quote
TLV4112CDR datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TLV4112CDR Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset175 µV
Voltage - supply span2.5 V
Current - supply700µA (x2 Channels)
Current - input bias0.3 pA
Current - output (Channel)320 mA
Operating temperature0°C ~ 70°C
Gain bandwidth product2.7 MHz
PackageBulk
Slew rate1.57V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

320 mA output — the spec that changes the board

The TLV4112CDR: The 2.7 MHz gain-bandwidth product and 1.57 V/µs slew rate are modest by modern standards, but the output muscle makes this the part you reach for when the load current is the bottleneck, not the signal bandwidth.

Supply range and temperature — where it works and where it doesn't

The supply span runs from 2.5 V to 6 V.

Bulk shipping — a kitting detail worth noting

The listing shows the package as Bulk, not Tape & Reel. That means the parts arrive in a tube or loose bag, not on a reel for automated pick-and-place. If your CM's line is set up for reels only, factor in a tube-feeder changeover or a hand-place step. The 8-SOIC footprint is standard — no surprises there.

Frequently asked questions

What is the equivalent replacement for TLV4112CDR?

A close functional peer is the TLV9351IDCKR, a single-channel op-amp with 3.5 MHz GBW, 20 V/µs slew rate, and 60 mA output — but it is a single, not dual, and has lower output current. The TLV9362IDDFR is a dual with 10.6 MHz GBW and 25 V/µs slew rate, also 60 mA output. Neither matches the 320 mA per channel of the TLV4112CDR, so a direct drop-in replacement with the same output drive is not available in these peers.