Skip to main content
Log in
Texas Instruments TLV4110IDGNR — Analog & Data Acquisition

TLV4110IDGNR – TI General-Purpose Op-Amp, 2.7 MHz

MPNTLV4110IDGNR
End of Life

Texas Instruments TLV4110IDGNR, single general-purpose op-amp, 2.7 MHz gain bandwidth, rail-to-rail output, 320 mA output current, 8-HVSSOP exposed-pad package.

$2.34Ref. price · indicative, final on quote
Texas Instruments TLV4110IDGNR datasheet (PDF)
Packaging8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TLV4110IDGNR specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset175 µV
Voltage - supply span2.5 V
Current - supply700µA
Current - input bias0.3 pA
Current - output (Channel)320 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product2.7 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate1.57V/µs
Case8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) Exposed Pad
Number of circuits1

Product details

What this op-amp is built for

The 320 mA output current rating sets it apart from typical signal-chain op-amps — this part is designed to drive resistive or capacitive loads directly, not just feed an ADC input.

Output drive and thermal design

Compared to the TLV9351IDCKR (60 mA output), the TLV4110IDGNR delivers over 5× the current drive, making it the choice for headphone amplifiers, solenoid drivers, or VCO buffer stages where a separate buffer IC would otherwise be needed.

The 0.118-inch (3.00 mm) width MSOP footprint is compact enough for 2-layer boards, but the exposed pad forces a thermal land that may require a 4-layer stack if the ambient exceeds 85°C.

Frequently asked questions

Is TLV4110IDGNR a single or dual op-amp?

It is a single-channel (one circuit) op-amp.

What is the closest functional second-source to TLV4110IDGNR?

The TLV9351IDCKR is a single general-purpose op-amp with rail-to-rail output and a similar supply range, but its output current is 60 mA versus 320 mA. For high-drive applications, the TLV4110IDGNR has no direct pin-compatible second-source; the TLV9362IDDFR (dual, 60 mA) also lacks the current capability.