Skip to main content
Log in
TLV271IDR

TLV271IDR CMOS Op-Amp, 3 MHz GBW, Rail-to-Rail Output

MPNTLV271IDR
End of Life

Texas Instruments TLV271IDR single CMOS operational amplifier, 3 MHz gain bandwidth, 2.6 V/µs slew rate, rail-to-rail output, 2.7 V to 16 V supply, 8-SOIC package, -40°C to 125°C operating temperature.

$0.94Ref. price · indicative, final on quote
Texas Instruments TLV271IDR datasheet (PDF)
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TLV271IDR specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeCMOS
Voltage - input offset500 µV
Voltage - supply span2.7 V
Current - supply625µA
Current - input bias1 pA
Current - output (Channel)8 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product3 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate2.6V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits1

Product details

Single CMOS op-amp in 8-SOIC — 3 MHz GBW, rail-to-rail output

The TLV271IDR: This combination suits it for general-purpose signal conditioning, sensor amplification, and active filtering in industrial control, automotive electronics, and battery-powered instrumentation where the supply rail may vary.

The 2.7 V minimum supply and 16 V maximum cover industrial buses without an external regulator.

8 mA output current and rail-to-rail swing — driving ADCs and low-impedance loads

The rail-to-rail output maximizes dynamic range in single-supply designs.

Frequently asked questions

What is the equivalent of TLV271IDR?

A close functional peer is the TLV9351IDCKR, which offers a 3.5 MHz GBW and 20 V/µs slew rate in a similar single-channel rail-to-rail package. For a direct parametric match, the TLV271IDR remains the primary recommendation.