Skip to main content
Texas Instruments TLV271CDBVR — Logic ICs
Texas Instruments

TI TLV271CDBVR CMOS Op-Amp, Rail-to-Rail Output, 3 MHz GBW

MPNTLV271CDBVR
End of Life

Texas Instruments TLV271CDBVR, single CMOS op-amp, rail-to-rail output, 3 MHz gain bandwidth, 2.6 V/µs slew rate, 2.7 V to 16 V supply, SOT-23-5 package, 0°C to 70°C.

$0.9Ref. price · indicative, final on quote
TLV271CDBVR datasheet
PackagingSC-74A, SOT-753
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TLV271CDBVR Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeCMOS
Voltage - input offset500 µV
Voltage - supply span2.7 V
Current - supply625µA
Current - input bias1 pA
Current - output (Channel)8 mA
Operating temperature0°C ~ 70°C
Gain bandwidth product3 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate2.6V/µs
CaseSC-74A, SOT-753
Number of circuits1

Product details

Single CMOS op-amp with rail-to-rail output — 3 MHz GBW, SOT-23-5

It delivers a 3 MHz gain bandwidth product and a 2.6 V/µs slew rate, drawing 625 µA of supply current. The input bias current is just 1 pA, and the input offset voltage is 500 µV.

The 2.7 V minimum supply lets this part run directly from a 3.3 V rail with margin, while the 16 V maximum covers 12 V and 15 V industrial supplies without needing a secondary regulator. Each channel can source or sink 8 mA, enough to drive the reference input of a typical SAR ADC or a small-signal relay coil through a transistor buffer.

Temperature grade and environment

For extended industrial or automotive environments, the TLV271IDBVR variant covers -40°C to 125°C.

Lifecycle and compliance

No LTB notice or successor has been issued.

Frequently asked questions

Is TLV271CDBVR a rail-to-rail output op amp?

Yes, the TLV271CDBVR has a rail-to-rail output stage, which maximizes the output voltage swing in single-supply designs.

Is TLV271CDBVR equivalent to TLV271IDBVR?

The TLV271CDBVR and TLV271IDBVR share the same electrical specifications — single CMOS op-amp, rail-to-rail output, 3 MHz GBW, 2.6 V/µs slew rate, 2.7 V to 16 V supply — but differ in temperature grade.

What is the slew rate of TLV271CDBVR?

The slew rate is 2.6 V/µs, which is adequate for general-purpose signal conditioning up to a few hundred kilohertz.