Quad op-amp with 10 V/µs slew rate for multi-channel signal chains
The four amplifiers share a common bias network, drawing 3.8 mA total supply current — roughly 0.95 mA per channel — which keeps the power budget manageable for multi-channel industrial or automotive boards.
The 9 MHz gain-bandwidth product means you can close a gain-of-10 amplifier with a usable bandwidth around 900 kHz, or a unity-gain buffer with the full 9 MHz. The 10 V/µs slew rate handles fast edges — a 2 V peak-to-peak step slews in 200 ns — so it suits multiplexed data-acquisition front ends and active filters where settling time matters. Input bias current is 0.7 pA typical, which keeps DC errors low when driving high-impedance sensors like photodiodes or pH probes. Output drive is rated 28 mA per channel, enough to swing into a 2 kΩ load to ground or drive a moderate ADC input.
It is RoHS non-compliant per the original listing, so verify your assembly's exemption or waiver if you need lead-free reflow.