Skip to main content
Texas Instruments TLV2622IP — Logic ICs
Texas Instruments

TLV2622IP CMOS Dual Op-Amp, 11 MHz GBW, Rail-to-Rail Output

MPNTLV2622IP
End of Life

Texas Instruments TLV2622IP, CMOS dual operational amplifier, 11 MHz gain bandwidth, 6 V/µs slew rate, rail-to-rail output, 2.7 V to 5.5 V supply, 800 µA per channel, -40°C to 125°C, 8-PDIP package.

$0.47Ref. price · indicative, final on quote
TLV2622IP datasheet
Packaging8-DIP (0.300", 7.62mm)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TLV2622IP Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeThrough Hole
Amplifier typeCMOS
Voltage - input offset250 µV
Voltage - supply span5.5 V
Current - supply800µA (x2 Channels)
Current - input bias2 pA
Current - output (Channel)28 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product11 MHz
PackageTube
Slew rate6V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

Dual CMOS op-amp for signal conditioning loops

Each channel draws 800 µA supply current, making the pair fit for multi-channel sensor interfaces or portable ADC drivers where per-channel power budget is tight. The input bias current sits at 2 pA, which keeps offset drift low when working with high-impedance sources like photodiodes or pH probes.

The 8-PDIP package (0.300" wide) is through-hole, which simplifies prototyping and rework in legacy boards or one-off instrumentation.

Output drive and rail-to-rail swing

Rail-to-rail output lets the TLV2622IP swing within millivolts of each supply rail, preserving dynamic range in low-voltage systems. Each channel can source or sink 28 mA, enough to drive a typical ADC input, a small relay coil, or a 50 Ω back-terminated line in short runs. The combination of 11 MHz GBW and 6 V/µs slew rate keeps phase margin healthy for gains above 5 — useful for active filters or fast servo loops.

Frequently asked questions

What are the key electrical specifications of the TLV2622IP?

Dual CMOS op-amp with 11 MHz gain-bandwidth product, 6 V/µs slew rate, rail-to-rail output, 800 µA supply current per channel, 2 pA input bias current, 250 µV input offset voltage, and 28 mA output drive per channel.

Can the TLV2622IP be used in battery-powered applications?

Yes. The 800 µA per channel supply current (1.6 mA total for both amplifiers) and 2.7 V minimum supply make it suitable for portable or battery-operated designs where power efficiency matters.