Skip to main content
Texas Instruments TLV2621IP — Logic ICs

TLV2621IP CMOS Op-Amp, 11 MHz, Rail-to-Rail, 8-DIP

MPNTLV2621IP
End of Life

Texas Instruments TLV2621IP, single CMOS op-amp, 11 MHz gain bandwidth, 6 V/µs slew rate, rail-to-rail output, 2.7 V to 5.5 V supply, 8-DIP through-hole package, -40°C to 125°C.

$0.37Ref. price · indicative, final on quote
Packaging8-DIP (0.300", 7.62mm)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TLV2621IP Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeThrough Hole
Amplifier typeCMOS
Voltage - input offset250 µV
Voltage - supply span5.5 V
Current - supply800µA
Current - input bias2 pA
Current - output (Channel)28 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product11 MHz
PackageTube
Slew rate6V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits1

Product details

11 MHz GBW, 6 V/µs slew — what it buys you

The TLV2621IP is a single-channel CMOS op-amp from Texas Instruments that delivers 11 MHz gain-bandwidth product and 6 V/µs slew rate, enough to handle fast sensor signals or audio-band filtering without running out of loop gain. Input bias current is 2 pA typical, so high-impedance sources like photodiode or pH probe front-ends see negligible loading.

Housed in an 8-pin DIP (8-PDIP) with 0.300" body width and 2.54 mm pitch, this is a through-hole part meant for breadboard prototyping, legacy board rework, or designs that avoid SMT for vibration or thermal reasons. ROHS3 compliant per the listing.

Frequently asked questions

Does TLV2621IP have rail-to-rail output?

Yes, the output type is rail-to-rail, allowing the output to swing close to both supply rails for maximum signal swing in low-voltage designs.

What is the slew rate of TLV2621IP?

The slew rate is 6 V/µs, which supports signal bandwidths up to roughly 1 MHz full-power bandwidth before slew-induced distortion appears.