Skip to main content
Texas Instruments TLV2474IPWP — Logic ICs
Texas Instruments

TLV2474IPWP Quad CMOS Op-Amp, 2.8 MHz, 1.5 V/µs, 14-HTSSOP

MPNTLV2474IPWP
End of Life

Texas Instruments TLV2474IPWP, quad CMOS rail-to-rail op-amp, 2.8 MHz gain bandwidth, 1.5 V/µs slew rate, 600 µA supply per channel, 2.7 V to 6 V supply, -40°C to 125°C, 14-HTSSOP exposed-pad package, Tube.

$4.32Ref. price · indicative, final on quote
TLV2474IPWP datasheet
Packaging14-TSSOP (0.173", 4.40mm Width) Exposed Pad
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TLV2474IPWP Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeCMOS
Voltage - input offset250 µV
Voltage - supply span2.7 V
Current - supply600µA (x4 Channels)
Current - input bias2.5 pA
Current - output (Channel)35 mA
Operating temperature-40°C ~ 125°C (TA)
Gain bandwidth product2.8 MHz
PackageTube
Slew rate1.5V/µs
Case14-TSSOP (0.173\", 4.40mm Width) Exposed Pad
Number of circuits4

Product details

With a 2.8 MHz gain-bandwidth product, this op-amp can close a gain-of-10 stage with a 280 kHz small-signal bandwidth — adequate for audio-band processing, 100 kHz sensor excitation, or anti-aliasing filters ahead of a 12-bit ADC sampling at 200 kSPS. The 1.5 V/µs slew rate limits full-power bandwidth to about 60 kHz at 5 V output swing, so fast pulse or square-wave applications (e.g., motor-current shunt amplifiers) need a faster part. The 600 µA per-channel supply current keeps the total quad power under 2.4 mA, which matters for battery-powered or thermally constrained boards.

14-HTSSOP exposed pad — thermal and layout notes

The part ships in a Tube, not tape-and-reel, so plan for manual or tube-fed pick-and-place.

Frequently asked questions

Is TLV2474IPWP a drop-in replacement for TLV2474 or other quad op-amps?

The TLV2474IPWP is the same die as the TLV2474 in a different package option (14-HTSSOP exposed pad vs. standard TSSOP). For other quad op-amps, verify pin compatibility and package footprint — the exposed pad may require a different PCB land pattern than a non-exposed-pad 14-TSSOP part.