Skip to main content
Log in
Texas Instruments TLV2474ID — Analog & Data Acquisition

TLV2474ID CMOS Quad Rail-to-Rail Op-Amp, 2.8 MHz, 14-SOIC

MPNTLV2474ID
End of Life

Texas Instruments TLV2474ID, CMOS quad rail-to-rail op-amp, 2.8 MHz gain bandwidth, 1.5 V/µs slew rate, 600 µA supply, 14-SOIC package, -40 to 125°C.

$4.32Ref. price · indicative, final on quote
Texas Instruments TLV2474ID datasheet (PDF)
Packaging14-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TLV2474ID specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeCMOS
Voltage - input offset250 µV
Voltage - supply span2.7 V
Current - supply600µA (x4 Channels)
Current - input bias2.5 pA
Current - output (Channel)35 mA
Operating temperature-40°C ~ 125°C (TA)
Gain bandwidth product2.8 MHz
PackageTube
Slew rate1.5V/µs
Case14-SOIC (0.154\", 3.90mm Width)
Number of circuits4

Product details

Quad CMOS op-amp for signal conditioning

The Texas Instruments TLV2474ID is a quad CMOS operational amplifier with rail-to-rail output, 2.8 MHz gain bandwidth product, and a 1.5 V/µs slew rate. Input bias current is 2.5 pA, and input offset voltage is 250 µV.

Supply current and rail-to-rail output

The TLV2474ID draws 600 µA for four amplifiers. The rail-to-rail output swing drives ADC inputs or low-impedance loads. Output current is rated at 35 mA per channel.

The 14-SOIC package is a standard footprint with wide distributor stocking, which simplifies second-source qualification.

Frequently asked questions

What is the substitute for TLV2474ID?

No direct pin-compatible substitute is listed in the official records. The TLV9351IDCKR is a single-channel CMOS op-amp with higher bandwidth (3.5 MHz) and slew rate (20 V/µs), but it is a different package and channel count. For a quad replacement, consider the OPA4374AIPWT (6.5 MHz, 5 V/µs, same 14-SOIC footprint) — verify supply voltage and offset specs against your design.

Is TLV2474ID compatible with 5V single supply?

Yes, the TLV2474ID operates from 2.7 V to 6 V, so a 5 V single supply is within its rated range. The rail-to-rail output provides full swing at 5 V.

How does TLV2474ID compare to OPA4340?

The OPA4340 is a quad CMOS rail-to-rail op-amp from TI with similar supply range (2.5 V to 5.5 V) and package (14-SOIC). The TLV2474ID offers a wider temperature range (-40°C to 125°C vs. -40°C to 85°C) and lower supply current (600 µA vs. 750 µA typical). The OPA4340 has a higher slew rate (6 V/µs) and bandwidth (5.5 MHz). Choose the TLV2474ID for extended temperature or lower power; choose the OPA4340 for higher speed.