Skip to main content
Texas Instruments TLV2474CD — Memory (DRAM / SRAM / Flash / EEPROM)
Texas Instruments

TLV2474CD TI CMOS Quad Op-Amp, Rail-to-Rail, 2.8 MHz

MPNTLV2474CD
End of Life

Texas Instruments TLV2474CD, CMOS quad operational amplifier, rail-to-rail output, 2.8 MHz gain bandwidth, 1.5 V/µs slew rate, 2.7 V to 6 V supply, 14-SOIC package, 0°C to 70°C operating temperature.

$3.98Ref. price · indicative, final on quote
TLV2474CD datasheet
Packaging14-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TLV2474CD Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeCMOS
Voltage - input offset250 µV
Voltage - supply span2.7 V
Current - supply600µA (x4 Channels)
Current - input bias2.5 pA
Current - output (Channel)35 mA
Operating temperature0°C ~ 70°C (TA)
Gain bandwidth product2.8 MHz
PackageTube
Slew rate1.5V/µs
Case14-SOIC (0.154\", 3.90mm Width)
Number of circuits4

Product details

Quad CMOS op-amp with rail-to-rail output for 2.7 V to 6 V designs

The TLV2474CD is a Texas Instruments quad CMOS operational amplifier in a 14-SOIC surface-mount package. It delivers rail-to-rail output swing, a 2.8 MHz gain-bandwidth product, and a 1.5 V/µs slew rate. Supply span runs from 2.7 V minimum to 6 V maximum, suiting battery-powered and low-voltage industrial signal chains. Each of the four channels draws 600 µA typical supply current, and the input bias current is just 2.5 pA — a fit for high-impedance sensors or photodiode front-ends. Output drive is rated at 35 mA per channel, enough to directly drive a modest ADC input or a small relay coil. The operating temperature range is 0°C to 70°C, so this part belongs in commercial and indoor equipment — office peripherals, test gear, instrumentation, and control panels — not under-hood or outdoor enclosures.

What the key ratings mean for your BOM

The 2.8 MHz gain-bandwidth product sets the usable closed-loop bandwidth for small-signal amplification. The 1.5 V/µs slew rate limits full-power output swing.

Lifecycle and sourcing posture

The TLV2474CD carries an Active lifecycle status and ROHS3 compliance. There is no last-time-buy notice or EOL announcement, so the part is safe to specify for new designs.

Frequently asked questions

Is TLV2474CD rail-to-rail?

Yes, the output type is rail-to-rail, so the output can swing to within millivolts of both supply rails. This is critical for low-voltage designs where signal headroom is scarce.

What is the TLV2474CD equivalent or alternative part?

A functional alternative within the same CMOS quad rail-to-rail class is the OPA4374AIPWT from Texas Instruments, which offers a 6.5 MHz GBW and 5 V/µs slew rate in a similar 14-pin package. The TLV9351IDCKR is a single-channel alternative with higher slew rate (20 V/µs) but different pinout. Evaluate the OPA4374 if you need more bandwidth while staying in the same supply range and package footprint.