Skip to main content
Texas Instruments TLV2473CDR — Analog & Data Acquisition

Texas Instruments TLV2473CDR CMOS Op-Amp, 2.8 MHz

MPNTLV2473CDR
End of Life

Texas Instruments TLV2473CDR, dual CMOS rail-to-rail op-amp, 2.8 MHz GBW, 1.5 V/µs slew, 2.7-6 V supply, 600 µA per channel, 14-SOIC, 0°C to 70°C.

$3.44Ref. price · indicative, final on quote
Packaging14-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TLV2473CDR specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeCMOS
Voltage - input offset250 µV
Voltage - supply span2.7 V
Current - supply600µA (x2 Channels)
Current - input bias2.5 pA
Current - output (Channel)35 mA
Operating temperature0°C ~ 70°C (TA)
Gain bandwidth product2.8 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate1.5V/µs
Case14-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

The TLV2473CDR: Supply span is 2.7 V to 6 V. Input bias current is 2.5 pA typical.

Slew rate and bandwidth — the speed check

Slew rate is 1.5 V/µs. Gain bandwidth product is 2.8 MHz. Output current is 35 mA per channel typical.

Temperature grade — keep it indoors

That covers office equipment, test gear, consumer audio, and appliance control boards.

For a BOM line, that means no LTB risk and no forced redesign. The 14-SOIC footprint is a common industry standard, so board layout is not a custom exercise.

Frequently asked questions

What is the slew rate of the TLV2473CDR?

The slew rate is 1.5 V/µs, which limits large-signal bandwidth to roughly 240 kHz for a 1 V peak-to-peak output — adequate for audio and slow ADC drive.