Skip to main content
Log in
TLV2462IDR

TLV2462IDR Dual Rail-to-Rail Op Amp, 6.4 MHz, 8-SOIC

MPNTLV2462IDR
Active

Texas Instruments TLV2462IDR, dual general-purpose op amp, 6.4 MHz gain bandwidth, 1.6 V/µs slew rate, rail-to-rail output, 2.7 V to 6 V supply, 550 µA per channel, -40°C to 125°C, 8-SOIC.

$2.8900Ref. price · indicative, final on quote
Texas Instruments TLV2462IDR datasheet (PDF)
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TLV2462IDR specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset500 µV
Voltage - supply span2.7 V
Current - supply550µA (x2 Channels)
Current - input bias1.3 nA
Current - output (Channel)80 mA
Operating temperature-40°C~125°C(TA)
Gain bandwidth product6.4 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate1.6V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

Dual op amp for single-supply signal chains

The Texas Instruments TLV2462IDR is a dual general-purpose operational amplifier in an 8-SOIC package, built for single-supply operation from 2.7 V to 6 V. Rail-to-rail output swing gives you the full headroom on low-voltage rails — useful when driving an ADC input or buffering a sensor signal without a bipolar supply. Each channel draws 550 µA supply current, so the pair fits comfortably in a battery-powered or channel-limited power budget.

For a production BOM line, this part carries no imminent obsolescence risk.

Frequently asked questions

What is the quiescent current per channel of TLV2462IDR?

Each channel draws 550 µA, for a total of 1.1 mA for both amplifiers.

Is TLV2462IDR an exact replacement for TLV2462IDRG4?

The TLV2462IDR and TLV2462IDRG4 share the same base product number TLV2462 and the same 8-SOIC package. The suffix difference typically indicates a reel/tape variation; electrically they are identical. Confirm the specific reel quantity and tape width with your distributor to ensure a drop-in fit on your pick-and-place setup.

Is TLV2462IDR suitable for audio applications?

With a 6.4 MHz gain-bandwidth product and 1.6 V/µs slew rate, the TLV2462IDR is suitable for line-level audio filtering, headphone drivers, and general-purpose signal conditioning in the audio band. For high-fidelity or low-noise preamplifier stages, a dedicated audio op amp with lower noise density would be a better fit.

What is the closest functional second-source to TLV2462IDR?

The TLV9351IDCKR is a single-channel rail-to-rail general-purpose op amp with a 3.5 MHz GBP and 20 V/µs slew rate, but it is a single channel in a different package. For a dual-channel replacement with similar supply range and rail-to-rail output, the TLV9362IDDFR (dual, 10.6 MHz, 25 V/µs) is a closer functional match, though it draws higher supply current. Neither is a pin-compatible drop-in; verify the PCB layout and power budget before substituting.