The slew rate limits full-power bandwidth to roughly 100 kHz at 2 Vpp output — beyond that, the output slews first and the small-signal bandwidth is academic. For a test engineer sweeping a filter, the 6.4 MHz GBW means unity-gain stability down to about 25 dB of noise gain; below that, check the phase margin against the datasheet curves.
Supply range and quiescent current
Quiescent current is 550 µA per amplifier — low enough for battery-operated instrumentation but not the lowest in the family; if every microamp matters, the TLV2460 family sibling draws less. The 1.3 nA input bias current suits high-impedance sources like pH probes or photodiode front-ends without excessive offset from bias current flowing through the source resistance.