Skip to main content
Log in
Texas Instruments TLV2462IDGKG4 — Analog & Data Acquisition

TLV2462IDGKG4 dual op-amp, 6.4 MHz GBW, rail-to-rail output

MPNTLV2462IDGKG4
End of Life

Texas Instruments TLV2462IDGKG4, dual general-purpose op-amp, 6.4 MHz gain-bandwidth, 1.6 V/µs slew rate, rail-to-rail output, 2.7 V to 6 V supply, -40°C to 125°C, 8-TSSOP/MSOP package.

Texas Instruments TLV2462IDGKG4 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TLV2462IDGKG4 specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset500 µV
Voltage - supply span2.7 V
Current - supply550µA (x2 Channels)
Current - input bias1.3 nA
Current - output (Channel)80 mA
Operating temperature-40°C~125°C(TA)
Gain bandwidth product6.4 MHz
PackageTube
Slew rate1.6V/µs
Case8-TSSOP, 8-MSOP (0.118\", 3.00mm Width)
Number of circuits2

Product details

Dual op-amp with rail-to-rail output and 6.4 MHz GBW

The TLV2462IDGKG4: Supply voltage spans 2.7 V to 6 V.

Industrial temperature range and low quiescent current

Each channel draws 550 µA typical supply current — low enough for battery-powered data loggers and portable instruments, especially when the rail-to-rail output avoids wasting headroom.

Housed in an 8-MSOP (3.00 mm width) package, the TLV2462IDGKG4 takes up minimal board area. It ships in a tube — fine for low-volume builds and prototyping; for reel quantities check the alternate order code.

Frequently asked questions

Is TLV2462IDGKG4 rail-to-rail?

Yes, the output type is rail-to-rail, so the output can swing within millivolts of the positive and negative supply rails.