Texas Instruments TLV2462CDRG4, dual general-purpose op-amp, 6.4 MHz gain-bandwidth, 1.6 V/µs slew rate, rail-to-rail output, 2.7 V to 6 V supply, 550 µA per channel, 8-SOIC, 0°C to 70°C.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 500 µV |
| Voltage - supply span | 2.7 V |
| Current - supply | 550µA (x2 Channels) |
| Current - input bias | 1.3 nA |
| Current - output (Channel) | 80 mA |
| Operating temperature | 0°C~70°C(TA) |
| Gain bandwidth product | 6.4 MHz |
| Package | Tape & Reel (TR) |
| Slew rate | 1.6V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 2 |
The TLV2462CDRG4: This combination suits it for sensor amplification, audio pre-amps, active filters, and ADC drive stages where moderate bandwidth and low power are the constraints.
With a minimum supply of 2.7 V, this op-amp runs directly from a single Li-ion cell without a negative supply. The 80 mA output current per channel can drive moderate loads like headphones or multiple ADC inputs.
Yes, the TLV2462CDRG4 features rail-to-rail output, allowing the output voltage to swing close to both supply rails.
Within the TLV2462 family, the TLV2462CDR shares the same pinout and 8-SOIC package. Confirm the exact temperature grade needed for your application before substituting.