Skip to main content
Log in
TLV2462CDR

TLV2462CDR Texas Instruments Op-Amp, 6.4 MHz, 1.6 V/µs

MPNTLV2462CDR
Active

Texas Instruments TLV2462CDR dual general-purpose op-amp, 6.4 MHz gain-bandwidth, 1.6 V/µs slew rate, rail-to-rail output, 8-SOIC package, tape & reel.

$2.7300Ref. price · indicative, final on quote
Texas Instruments TLV2462CDR datasheet (PDF)
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TLV2462CDR specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset500 µV
Voltage - supply span2.7 V
Current - supply550µA (x2 Channels)
Current - input bias1.3 nA
Current - output (Channel)80 mA
Operating temperature0°C~70°C(TA)
Gain bandwidth product6.4 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate1.6V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

Parametric fit for signal-conditioning loops

The TLV2462CDR: Each channel draws 550 µA supply current, which keeps the total quiescent draw under 1.1 mA for both amplifiers — a reasonable trade-off for a 6.4 MHz part in battery-powered or multi-channel data-acquisition boards. The rail-to-rail output stage swings within millivolts of both supply rails, so a single 2.7 V to 6 V supply can drive an ADC input or a downstream comparator without a level-shift stage.

Package and supply-voltage compatibility

The input common-mode range extends beyond the rails, and the output swings rail-to-rail, so no external headroom is wasted. For industrial or automotive temperature ranges, a different grade (e.g., TLV2462IDR with -40°C to +125°C) would be needed.

Because it is an active, standard-product op-amp, sourcing is straightforward through authorized distribution.

Frequently asked questions

What is the TLV2462CDR's gain-bandwidth product and slew rate?

The TLV2462CDR has a 6.4 MHz gain-bandwidth product and a 1.6 V/µs slew rate. These figures set the usable signal bandwidth and the large-signal response — for a gain of 10, the closed-loop bandwidth is roughly 640 kHz, and a 2 V output step slews in about 1.25 µs.

Is the TLV2462CDR a drop-in replacement for the LM6152ACMX/NOPB?

No. The LM6152ACMX/NOPB is a faster sibling (80 MHz GBW, 30 V/µs slew rate) but it is not pin-compatible — both are 8-SOIC, but the LM6152 has a different input bias current and offset voltage. A board designed for the LM6152 would need a BOM change and possibly a compensation tweak to use the TLV2462CDR.