Texas Instruments TLV2462CDGKRG4, dual general-purpose operational amplifier, rail-to-rail output, 6.4 MHz gain bandwidth, 1.6 V/µs slew rate, 2.7 V to 6 V supply, 8-VSSOP package, 0°C to 70°C.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 500 µV |
| Voltage - supply span | 2.7 V |
| Current - supply | 550µA (x2 Channels) |
| Current - input bias | 1.3 nA |
| Current - output (Channel) | 80 mA |
| Operating temperature | 0°C~70°C(TA) |
| Gain bandwidth product | 6.4 MHz |
| Package | Tape & Reel (TR) |
| Slew rate | 1.6V/µs |
| Case | 8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) |
| Number of circuits | 2 |
The TLV2462CDGKRG4: The rail-to-rail output stage lets the signal swing to within millivolts of each supply, preserving dynamic range when the headroom is tight — a common requirement in battery-powered instrumentation or ADC front-ends.
The 1.6 V/µs slew rate limits the full-power bandwidth to roughly 100 kHz at 5 V output swing, so it is not a high-speed video or RF amp — but for control-loop conditioning or ADC drive below 100 kHz, it has enough margin.
Yes, the output stage is rail-to-rail, meaning the output voltage can swing to within a few millivolts of the positive and negative supply rails. This is confirmed in the specifications.