Skip to main content
TLV2462CDG4

TLV2462CDG4 Texas Instruments Dual Op-Amp, 6.4 MHz

MPNTLV2462CDG4
End of Life

Texas Instruments TLV2462CDG4 dual general-purpose op-amp, 6.4 MHz gain bandwidth, 1.6 V/µs slew rate, rail-to-rail output, 550 µA supply per channel, 2.7 V to 6 V supply, 8-SOIC package, 0°C to 70°C.

Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TLV2462CDG4 specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset500 µV
Voltage - supply span2.7 V
Current - supply550µA (x2 Channels)
Current - input bias1.3 nA
Current - output (Channel)80 mA
Operating temperature0°C~70°C(TA)
Gain bandwidth product6.4 MHz
PackageTube
Slew rate1.6V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

6.4 MHz GBW — what it buys the signal chain

The TLV2462CDG4 is a dual general-purpose op-amp from Texas Instruments with a 6.4 MHz gain-bandwidth product and a 1.6 V/µs slew rate — enough bandwidth for audio-band filtering, sensor conditioning up to a few hundred kHz, and low-speed ADC drivers.

Supply current and temperature grade — BOM-fit check

Each channel draws 550 µA quiescent supply current, so the dual package pulls about 1.1 mA total — low enough for battery-operated instruments but not micropower.

The TLV2462CDG4 is the commercial-temperature, Tube-shipped variant of the base TLV2462 family.

Frequently asked questions

Is TLV2462CDG4 the same as TLV2462CD?

The TLV2462CDG4 and TLV2462CD share the same base part number and electrical specs — both are dual op-amps in 8-SOIC with 0°C to 70°C range. The G4 suffix indicates a lead-free (RoHS) finish and a specific packaging option (Tube). Functionally they are interchangeable; the G4 variant is the current lead-free offering.

Can TLV2462CDG4 replace a failed TLV2462CD?

Yes — the TLV2462CDG4 is the lead-free, RoHS-compliant version of the TLV2462CD. Electrically identical, same 8-SOIC footprint, same temperature grade. No board change needed.