Skip to main content
Log in
Texas Instruments TLV2374IDR — Analog & Data Acquisition

TLV2374IDR Quad General-Purpose Op-Amp, 3 MHz, Rail-to-Rail

MPNTLV2374IDR
End of Life

Texas Instruments TLV2374IDR, quad general-purpose op-amp, 3 MHz gain bandwidth, 2.1 V/µs slew rate, rail-to-rail output, 2.7 V to 16 V supply, 750 µA total supply current, -40 to 125°C, 14-SOIC.

$2.37Ref. price · indicative, final on quote
Texas Instruments TLV2374IDR datasheet (PDF)
Packaging14-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TLV2374IDR specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset2 mV
Voltage - supply span2.7 V
Current - supply750µA (x4 Channels)
Current - input bias1 pA
Current - output (Channel)16 mA
Operating temperature-40°C ~ 125°C (TA)
Gain bandwidth product3 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate2.1V/µs
Case14-SOIC (0.154\", 3.90mm Width)
Number of circuits4

Product details

Quad op-amp for multi-channel signal chains

Each of the four amplifiers draws 187.5 µA from the total 750 µA supply current, making it a power-efficient choice for multi-stage sensor conditioning, active filters, or data-acquisition front-ends where board space and per-channel power budget both matter.

Supply range and temperature coverage

The 16 mA per-channel output current is sufficient to drive the input of an ADC or a moderate load, but if you are driving a cable or a heavy analog front-end, budget for a buffer stage.

Frequently asked questions

What is the equivalent or replacement for TLV2374IDR?

The closest functional peer is the OPA4374AIPWT from TI, also a quad CMOS rail-to-rail op-amp in a similar package. The OPA4374 offers a higher 6.5 MHz gain-bandwidth and 5 V/µs slew rate with 600 µA total supply current, so it is a speed upgrade at a slightly lower power per channel. Pin compatibility should be verified against the respective datasheets before substitution.

Can TLV2374IDR be used as a comparator?

This is a general-purpose op-amp, not a comparator. While it can be pressed into comparator service at low speeds, the output stage is not designed for the open-loop saturation recovery that a dedicated comparator handles cleanly. For reliable threshold detection, use a comparator part.