Single-supply rail-to-rail op-amp in a through-hole DIP
The Texas Instruments TLV2371IP is a single-channel general-purpose operational amplifier in an 8-pin PDIP package. It delivers a 3 MHz gain-bandwidth product and a 2.1 V/µs slew rate, with rail-to-rail output swing that lets it drive close to the supply rails. The input bias current sits at 1 pA, and the supply current is 750 µA per amplifier. Operating from 2.7 V to 16 V single supply, it covers the standard industrial and automotive battery rails.
Where it fits on the board
The 8-DIP package (0.300" body width, 7.62 mm pitch) is a through-hole footprint that plugs into standard DIP sockets or solders directly into plated-through holes. This makes the TLV2371IP a natural choice for prototyping boards, legacy equipment repairs, or any design where SMT reflow is not available. The 16 mA output current per channel is enough to drive a logic input or a small signal relay coil directly.
Temperature range and environment
Rated for -40°C to 125°C, the TLV2371IP suits industrial environments such as motor drives, outdoor telecom enclosures, and factory automation panels. The full temperature span means no derating for ambient heat in a sealed cabinet or under-hood automotive auxiliary circuits.
Lifecycle and sourcing reality
The TLV2371IP carries an Active lifecycle status per TI's official records, with ROHS3 compliance. No last-time-buy or end-of-life notice applies. For BOM lines requiring a through-hole op-amp, this part is a current-production choice with no near-term obsolescence risk. Availability and pricing confirmed at quote time.