This combination suits it for signal conditioning, active filtering, and buffer stages in battery-powered or low-voltage equipment where board space is tight.
The 7 MHz gain-bandwidth product sets the usable small-signal bandwidth — expect roughly 700 kHz closed-loop gain at a gain of 10. The 3 V/µs slew rate limits large-signal response; a 2 V peak-to-peak output step slews in about 670 ns, which is adequate for audio and moderate-speed sensor interfaces but not for video or fast data converters. Input offset voltage is 1 mV typical, and input bias current is 20 nA — both reasonable for general-purpose work but not precision-grade. The 1.75 mA supply current per channel is moderate; in a multi-amp design the total adds up. Output can source or sink 20 mA, enough to drive an ADC input or a small relay.
Package and footprint
Housed in a 5-pin SOT-23 (SC-74A) package, the TLV2361CDBVT occupies about 3 mm² of board area. The SOT-23-5 footprint is standard and widely supported in layout tools. The part is specified for surface-mount assembly only.