Skip to main content
Texas Instruments TLV2341IPW — Logic ICs
Texas Instruments

TLV2341IPW CMOS Op-Amp, 1.7 MHz, 3.6 V/µs, 8-TSSOP

MPNTLV2341IPW
End of Life

Texas Instruments LinCMOS™ TLV2341IPW, CMOS single op-amp, 1.7 MHz gain bandwidth, 3.6 V/µs slew rate, 675 µA supply, 0.6 pA input bias, 2 V to 8 V supply, -40°C to 85°C, 8-TSSOP package.

$0.44Ref. price · indicative, final on quote
TLV2341IPW datasheet
Packaging8-TSSOP (0.173", 4.40mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TLV2341IPW Technical Specifications
ParameterValue
SeriesLinCMOS™
Mounting typeSurface Mount
Amplifier typeCMOS
Voltage - input offset1.1 mV
Voltage - supply span8 V
Current - supply675µA
Current - input bias0.6 pA
Current - output (Channel)30 mA
Operating temperature-40°C ~ 85°C
Gain bandwidth product1.7 MHz
PackageBulk
Slew rate3.6V/µs
Case8-TSSOP (0.173\", 4.40mm Width)
Number of circuits1

Product details

1.7 MHz GBW, 3.6 V/µs — what it means for signal conditioning

Its 1.7 MHz gain-bandwidth product and 3.6 V/µs slew rate handle audio-band filtering, sensor buffering, and slow ADC front-ends without wasting current — the supply draw sits at 675 µA quiescent. The 0.6 pA input bias current is the standout spec for photodiode or high-impedance transducer interfaces where leakage across the input nodes would otherwise swamp the signal.

The 2 V minimum is tight enough for two alkaline cells or a Li-ion battery near end-of-discharge.

Industrial temperature range, no automotive grade

For the industrial band, the temperature margin is adequate — no derating needed at the upper end.

ROHS3 compliant.

Frequently asked questions

Can TLV2341IPW operate from a 3.3 V single supply?

Yes, the supply range is 2 V to 8 V, so a 3.3 V single supply is well within the operating window. No split supply needed.

What are the equivalent parts for TLV2341IPW?

A close functional peer is the OPA4374AIPWT from TI — a quad CMOS op-amp with 6.5 MHz GBW and 5 V/µs slew rate, but in a different package (TSSOP-14) and with four channels instead of one. For a single-channel alternative, the TLV9351IDCKR offers 3.5 MHz GBW and 20 V/µs slew rate in a SC-70 package, though its supply minimum is 4.5 V. Neither is a drop-in replacement; verify the package and supply requirements against your board.