Texas Instruments TLV2314IDGKT, dual general-purpose op-amp, 3 MHz gain bandwidth, 1.5 V/µs slew rate, rail-to-rail output, 8-VSSOP package, -40°C to 125°C.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 750 µV |
| Voltage - supply span | 5.5 V |
| Current - supply | 150µA (x2 Channels) |
| Current - input bias | 1 pA |
| Current - output (Channel) | 20 mA |
| Operating temperature | -40°C ~ 125°C |
| Gain bandwidth product | 3 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 1.5V/µs |
| Case | 8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) |
| Number of circuits | 2 |
The 150 µA supply current per channel keeps the power budget tight in multi-channel designs. Input bias current is 1 pA, so it handles high-impedance sources like photodiodes or pH probes without loading the signal.
Housed in an 8-VSSOP (3.00 mm × 3.00 mm body), the TLV2314IDGKT fits tight PCB layouts where board area is at a premium. Surface-mount assembly only — no through-hole variant.
Yes, the TLV2314IDGKT has rail-to-rail output, which maximizes dynamic range at low supply voltages.
The TLV2314IDGKT is available in an 8-VSSOP package (3.00 mm × 3.00 mm body), supplied in Tape & Reel or Cut Tape.
The TLV9362IDDFR is a two-channel alternative with higher speed (10.6 MHz GBW, 25 V/µs slew rate) but draws more supply current (2.6 mA per channel). The TLV9351IDCKR is a single-channel alternative with 3.5 MHz GBW and 20 V/µs slew rate. Neither is a pin-compatible second source; verify the pinout and supply current trade-offs for your design.