Texas Instruments TLV170IDBVT, single general-purpose op-amp, 1.2 MHz gain bandwidth, rail-to-rail output, 2.7 V to 36 V supply, SOT-23-5 package, -40°C to 125°C.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 500 µV |
| Voltage - supply span | 2.7 V |
| Current - supply | 125µA |
| Current - input bias | 10 pA |
| Current - output (Channel) | 17 mA |
| Operating temperature | -40°C ~ 125°C |
| Gain bandwidth product | 1.2 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 0.4V/µs |
| Case | SC-74A, SOT-753 |
| Number of circuits | 1 |
At the low end, the part runs from a 2.7 V rail; at the high end, it tolerates 36 V industrial supplies with margin.
The 125°C upper limit covers under-hood sensor interfaces and motor-drive feedback circuits where ambient heat is a given. No AEC-Q100 mark in the listing, but the temperature range itself matches many automotive-qualified parts — verify the specific qualification against your program's requirements.
Yes, the TLV170IDBVT features a rail-to-rail output stage, maximizing dynamic range at low supply voltages.
The TLV9351IDCKR is a single general-purpose op-amp with a wider 3.5 MHz GBP and 20 V/µs slew rate, but it requires a minimum 4.5 V supply. The TLV170IDBVT's 2.7 V minimum supply makes it the better fit for 3.3 V systems.
The TLV170IDBVT has a slew rate of 0.4 V/µs, adequate for general-purpose signal conditioning up to a few hundred kilohertz.