Dual op-amp with 45 V/µs slew rate in a through-hole DIP
The Texas Instruments TLE2142IP is a dual-channel general-purpose operational amplifier in an 8-pin DIP package (0.300", 7.62 mm body). It delivers a 45 V/µs slew rate and 5.9 MHz gain-bandwidth product, with rail-to-rail output swing. Supply span runs from 4 V to 44 V, and the industrial temperature range of -40°C to 105°C suits it for motor-drive feedback, industrial sensor conditioning, and power-supply control loops where through-hole assembly is preferred or mandated.
Slew rate and supply — what they mean for your circuit
The 45 V/µs slew rate and 5.9 MHz gain-bandwidth product support closed-loop gains up to a few hundred at audio frequencies. Supply current is 6.9 mA per channel.
Package and mounting — through-hole matters
This is a through-hole 8-DIP (0.300", 7.62 mm pitch) part, supplied in a Tube. The supplier device package is 8-PDIP. If your board is all surface-mount, this part requires a different assembly step — hand-insertion or wave-solder. The DIP footprint is common on legacy industrial control cards, prototype boards, and low-volume production runs where SMT reflow isn't available. Confirm your PCB has the 0.300" row spacing before ordering.
Lifecycle and compliance — active, no end-of-life concern
The TLE2142IP carries an Active product status and is ROHS3 compliant. There is no last-time-buy notice or obsolescence risk.