Texas Instruments TLE2082ACP, dual JFET-input operational amplifier, 10 MHz gain bandwidth, 40 V/µs slew rate, 4.5 V to 38 V supply, 0°C to 70°C, 8-DIP (0.300") through-hole package, Tube.
| Parameter | Value |
|---|---|
| Mounting | Through Hole |
| Amplifier type | J-FET |
| Voltage - input offset | 700 µV |
| Voltage - supply span | 4.5 V |
| Current - supply | 3.1mA (x2 Channels) |
| Current - input bias | 20 pA |
| Current - output (Channel) | 48 mA |
| Operating temperature | 0°C ~ 70°C (TA) |
| Gain bandwidth product | 10 MHz |
| Package | Tube |
| Slew rate | 40V/µs |
| Case | 8-DIP (0.300\", 7.62mm) |
| Number of circuits | 2 |
The TLE2082ACP is supplied in an 8-DIP (0.300", 7.62 mm) through-hole package, with the supplier device package listed as 8-PDIP. It ships in a Tube.
Two circuits per package, each drawing 3.1 mA supply current. The 20 pA input bias current is typical for a JFET stage — orders of magnitude lower than a bipolar op-amp, which matters when the feedback network uses megohm resistors.
The slew rate is 40 V/µs, which is the headline dynamic spec for this dual JFET op-amp.