Active JFET op-amp in 8-SOIC — 2 MHz GBP, 3.4 V/µs slew rate
It operates from a 7 V to 36 V supply span and draws 290 µA quiescent current, making it suitable for battery-powered or industrial signal chains where moderate speed and low power are needed. The JFET input stage keeps input bias current at 4 pA, which is the key spec for high-impedance sources like photodiodes or piezoelectric sensors — the 500 µV input offset voltage is typical for this class and fine for most gain-of-10 or higher stages without trimming.
Sourcing and lifecycle
It is ROHS3 compliant. For dual-sourcing or a lower-power alternative, the TLV9351IDCKR is a general-purpose rail-to-rail output op-amp with a similar supply range, though its input stage is not JFET and the input bias current is 10 pA — not a direct pin-for-pin swap but a functional alternative if the high-impedance input is not critical.