Skip to main content
Texas Instruments TLC4502IDR — Memory (DRAM / SRAM / Flash / EEPROM)
Texas Instruments

TLC4502IDR CMOS Op-Amp, Rail-to-Rail, 4.7 MHz, 8-SOIC

MPNTLC4502IDR
End of Life

Texas Instruments TLC4502IDR, dual CMOS rail-to-rail op-amp, 4.7 MHz GBW, 2.5 V/µs slew rate, 10 µV offset, 8-SOIC package, -40 to 125°C.

$6.82Ref. price · indicative, final on quote
TLC4502IDR datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TLC4502IDR Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeCMOS
Voltage - input offset10 µV
Voltage - supply span6 V
Current - supply2.5mA (x2 Channels)
Current - input bias1 pA
Current - output (Channel)50 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product4.7 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate2.5V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

TLC4502IDR — dual CMOS rail-to-rail op-amp for precision signal chains

The Texas Instruments TLC4502IDR is a dual CMOS operational amplifier with rail-to-rail output, designed for low-offset, low-bias-current signal conditioning. It delivers a gain-bandwidth product of 4.7 MHz and a slew rate of 2.5 V/µs, with a typical input offset voltage of 10 µV and input bias current of 1 pA. Each channel can source or sink 50 mA. The part operates from a 4 V to 6 V supply span and is specified over the -40°C to 125°C temperature range, making it suitable for industrial sensor interfaces, automotive modules, and precision analog front-ends.

What the key ratings mean for your BOM

The 4.7 MHz gain-bandwidth product sets the usable closed-loop bandwidth. The 2.5 V/µs slew rate limits full-power response.

Package and mounting

Housed in an 8-pin SOIC package (3.90 mm body width), the TLC4502IDR is a surface-mount part that fits standard 8-SOIC footprints. The supplier device package is also 8-SOIC. Available in Tape & Reel or Cut Tape options for pick-and-place or small-batch assembly.

Frequently asked questions

What is the TLC4502IDR pinout?

The TLC4502IDR uses the standard 8-pin SOIC pinout for a dual op-amp: pins 1 and 7 are outputs, pins 2 and 6 are inverting inputs, pins 3 and 5 are non-inverting inputs, pin 4 is V-, and pin 8 is V+. The exact pin functions are defined in the TI datasheet.

Can TLC4502IDR replace TLC4501?

The TLC4501 is a single-channel version of the same amplifier family. The TLC4502IDR is a dual-channel part, so it can replace the TLC4501 in a design if the second channel is unused or the PCB layout accommodates the extra channel. Pinout and supply range are consistent across the family.