Texas Instruments TLC272CD, LinCMOS™ series, dual CMOS operational amplifier, 2.2 MHz gain bandwidth, 5.3 V/µs slew rate, 3 V to 16 V supply, 0.7 pA input bias, 8-SOIC surface mount, 0°C to 70°C commercial temperature.
| Parameter | Value |
|---|---|
| Series | LinCMOS™ |
| Mounting | Surface Mount |
| Amplifier type | CMOS |
| Voltage - input offset | 1.1 mV |
| Voltage - supply span | 16 V |
| Current - supply | 1.9mA (x2 Channels) |
| Current - input bias | 0.7 pA |
| Current - output (Channel) | 30 mA |
| Operating temperature | 0°C ~ 70°C (TA) |
| Gain bandwidth product | 2.2 MHz |
| Package | Tube |
| Slew rate | 5.3V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 2 |
It delivers a 2.2 MHz gain-bandwidth product and a 5.3 V/µs slew rate, with an input bias current of 0.7 pA.
Operates from 3 V to 16 V total supply (single or split). Each channel draws 1.9 mA quiescent supply current. Output can source or sink 30 mA per channel. Input offset voltage is 1.1 mV typical.
The OPA4374AIPWT is a quad CMOS op-amp with similar 5 V/µs slew rate and 0.5 pA input bias, but it's a quad in TSSOP-14 with rail-to-rail output — not a pin-for-pin swap, but a functional alternative if board space and channel count allow. The TLV9362IDDFR is a newer 10.6 MHz dual with rail-to-rail output and 2.6 mA supply per channel; trade higher bandwidth for higher quiescent current.
Standard 8-SOIC dual op-amp pinout: pin 1 = output A, pin 2 = inverting input A, pin 3 = non-inverting input A, pin 4 = V-, pin 5 = non-inverting input B, pin 6 = inverting input B, pin 7 = output B, pin 8 = V+.