Skip to main content
Texas Instruments TLC272ACD — Memory (DRAM / SRAM / Flash / EEPROM)
Texas Instruments

TLC272ACD Texas Instruments LinCMOS Dual Op-Amp, 2.2 MHz

MPNTLC272ACD
End of Life

Texas Instruments LinCMOS™ series, TLC272ACD, dual CMOS op-amp in 8-SOIC. 2.2 MHz gain bandwidth, 5.3 V/µs slew rate, 3 V to 16 V supply range, 0°C to 70°C operating temperature.

$2.53Ref. price · indicative, final on quote
TLC272ACD datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TLC272ACD Technical Specifications
ParameterValue
SeriesLinCMOS™
Mounting typeSurface Mount
Amplifier typeCMOS
Voltage - input offset900 µV
Voltage - supply span16 V
Current - supply1.9mA (x2 Channels)
Current - input bias0.7 pA
Current - output (Channel)30 mA
Operating temperature0°C ~ 70°C (TA)
Gain bandwidth product2.2 MHz
PackageTube
Slew rate5.3V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

TLC272ACD — dual CMOS op-amp, LinCMOS series

The TLC272ACD is a dual CMOS operational amplifier from Texas Instruments' LinCMOS series, in an 8-SOIC surface-mount package. It delivers a gain bandwidth product of 2.2 MHz and a slew rate of 5.3 V/µs, running on a single or split supply from 3 V to 16 V. With a typical supply current of 1.9 mA per amplifier and an input bias current of 0.7 pA, it suits battery-powered or low-drift signal conditioning in commercial-temperature (0°C to 70°C) indoor equipment — think sensor buffers, active filters, and data-acquisition front-ends where CMOS inputs keep leakage out of the signal path.

Lifecycle and sourcing — active, no LTB watch needed

Texas Instruments lists the TLC272ACD as Active with ROHS3 compliance. No last-time-buy or end-of-life notice is in the channel. For production BOMs, this part is a stable line item — no urgency to stockpile, but the usual lead-time buffer applies. Availability and pricing confirmed at quote time.

Frequently asked questions

What is the slew rate of TLC272ACD?

The slew rate is 5.3 V/µs, which is typical for a CMOS op-amp in this class — enough for audio-band signals and moderate-speed sensor conditioning.

Is TLC272ACD pin compatible with TLC272B?

The TLC272ACD and TLC272B share the same 8-SOIC pinout — both are dual CMOS op-amps in the LinCMOS family. The difference is in the offset voltage grade; the 'A' suffix indicates tighter input offset (900 µV max) compared to the standard grade.

Is TLC272ACD pin compatible with LM358?

The TLC272ACD uses the same 8-SOIC pinout as the LM358 — both are dual op-amps with the standard pin arrangement (outputs on pins 1 and 7, inverting inputs on pins 2 and 6, non-inverting on pins 3 and 5, V+ on pin 8, V- on pin 4). However, the LM358 is a bipolar part with different input/output characteristics; the TLC272ACD's CMOS inputs offer much lower bias current (0.7 pA vs µA range).