Skip to main content
Texas Instruments TLC271BIDR — Memory (DRAM / SRAM / Flash / EEPROM)
Texas Instruments

TLC271BIDR Op Amp, 2.2 MHz GBW, 8-SOIC

MPNTLC271BIDR
End of Life

Texas Instruments LinCMOS™ series, TLC271BIDR, general-purpose op amp, single circuit, 2.2 MHz gain bandwidth, 5.3 V/µs slew rate, 0.7 pA input bias, 4 V to 16 V supply, -40°C to 85°C, 8-SOIC surface mount.

$1.34Ref. price · indicative, final on quote
TLC271BIDR datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TLC271BIDR Technical Specifications
ParameterValue
SeriesLinCMOS™
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset390 µV
Voltage - supply span16 V
Current - supply950µA
Current - input bias0.7 pA
Current - output (Channel)30 mA
Operating temperature-40°C ~ 85°C
Gain bandwidth product2.2 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate5.3V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits1

Product details

What this single-supply op amp does on your board

The Texas Instruments TLC271BIDR is a single-channel general-purpose operational amplifier from the LinCMOS™ series. Gain bandwidth product is 2.2 MHz, slew rate is 5.3 V/µs.

Package and temperature grade — where it fits

Housed in an 8-SOIC (0.154", 3.90 mm width) package, the TLC271BIDR sits on a standard surface-mount footprint shared by hundreds of single-op-amp parts. The operating temperature range of -40°C to 85°C covers industrial control cabinets, outdoor telecom shelters, and factory-floor sensor modules — but stops short of automotive under-hood or extended military environments. If your BOM calls for a -40°C to 125°C range, the TLV9351IDCKR (3.5 MHz, rail-to-rail output) is a functional alternative, though not a pin-for-pin replacement without checking the output swing and supply limits.

Sourcing and lifecycle — no last-time-buy pressure

The TLC271BIDR carries an Active lifecycle status with ROHS3 compliance. No NRND flag, no announced EOL.

Frequently asked questions

What is the gain bandwidth product of TLC271BIDR?

The gain bandwidth product is 2.2 MHz, which sets the usable closed-loop gain × frequency product before roll-off.

Does TLC271BIDR come in tape and reel packaging?

Yes, it is available in Tape & Reel (TR) and Cut Tape (CT) options for surface-mount assembly.

Is TLC271BIDR a direct replacement for TLC271?

The TLC271BIDR is a specific orderable variant of the TLC271 family in an 8-SOIC package with tape-and-reel packaging. It shares the same amplifier core and pinout as the base TLC271, but verify the package and temperature grade against your existing BOM entry before substituting.