Skip to main content
Texas Instruments TLC2274CDR — Memory (DRAM / SRAM / Flash / EEPROM)
Texas Instruments

TLC2274CDR Quad Rail-to-Rail Op-Amp, 2.25 MHz, 3.6 V/µs

MPNTLC2274CDR
End of Life

Texas Instruments TLC2274CDR, quad general-purpose op-amp, 14-SOIC surface mount, rail-to-rail output, 2.25 MHz gain bandwidth, 3.6 V/µs slew rate, 4.4 V to 16 V supply, 0°C to 70°C.

$2.51Ref. price · indicative, final on quote
TLC2274CDR datasheet
Packaging14-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TLC2274CDR Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset300 µV
Voltage - supply span4.4 V
Current - supply4.8mA (x4 Channels)
Current - input bias1 pA
Current - output (Channel)50 mA
Operating temperature0°C ~ 70°C (TA)
Gain bandwidth product2.25 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate3.6V/µs
Case14-SOIC (0.154\", 3.90mm Width)
Number of circuits4

Product details

Quad op-amp for multi-channel signal conditioning

The Texas Instruments TLC2274CDR is a quad general-purpose operational amplifier in a 14-SOIC package, delivering rail-to-rail output swing across a 4.4 V to 16 V supply range. Each of the four channels provides a 2.25 MHz gain-bandwidth product and a 3.6 V/µs slew rate — enough bandwidth for audio-frequency active filters, sensor buffers, and ADC driver stages in commercial-temperature equipment (0°C to 70°C). The 1 pA input bias current suits high-impedance sources like photodiode or pH probe front-ends, though the 300 µV input offset voltage sets the DC accuracy floor.

Supply and output headroom

Rail-to-rail output swings close to both supply rails. Each output can source or sink 50 mA.

Package and mounting

Housed in a 14-SOIC (3.90 mm body width), the TLC2274CDR is a standard surface-mount footprint. The tape-and-reel option (TR) is for pick-and-place; cut-tape (CT) is for prototyping.

Frequently asked questions

Is TLC2274CDR obsolete or active?

Active. TI lists the TLC2274CDR with a current lifecycle stage and ROHS3 compliance — no end-of-life notice is in effect.

Does TLC2274CDR have rail-to-rail output?

Yes, the output type is rail-to-rail, allowing the signal to swing close to both supply rails.

What is TLC2274CDR's listed slew rate?

The slew rate is 3.6 V/µs, which supports signal frequencies up to roughly 100 kHz at full output swing before distortion increases.

Is TLC2274CDR available in tape and reel?

Yes, the TLC2274CDR is available in Tape & Reel (TR) for automated assembly, as well as Cut Tape (CT) for smaller quantities.