Skip to main content
Log in
Texas Instruments TLC2272CP — Analog & Data Acquisition

TLC2272CP CMOS Rail-to-Rail Op Amp, 2.25 MHz, 8-DIP

MPNTLC2272CP
End of Life

Texas Instruments TLC2272CP, dual CMOS rail-to-rail op amp, 2.25 MHz GBW, 3.6 V/µs slew rate, 1 pA input bias, 4.4 V to 16 V supply, 50 mA output per channel, 8-DIP (0.300") through-hole package, 0°C to 70°C.

$5.52Ref. price · indicative, final on quote
Texas Instruments TLC2272CP datasheet (PDF)
Packaging8-DIP (0.300", 7.62mm)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TLC2272CP specifications
ParameterValue
Output typeRail-to-Rail
MountingThrough Hole
Amplifier typeCMOS
Voltage - input offset300 µV
Voltage - supply span4.4 V
Current - supply2.4mA (x2 Channels)
Current - input bias1 pA
Current - output (Channel)50 mA
Operating temperature0°C ~ 70°C (TA)
Gain bandwidth product2.25 MHz
PackageTube
Slew rate3.6V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

Dual CMOS op amp for single-supply signal chains

The TLC2272CP is a dual CMOS op amp with rail-to-rail output. Gain-bandwidth product is 2.25 MHz, slew rate is 3.6 V/µs, input bias current is 1 pA, supply range is 4.4 V to 16 V, package is 8-DIP, temperature range is 0°C to 70°C.

Rail-to-rail output swings close to the supply rails. Input bias current is 1 pA. Input offset voltage is 300 µV.

Supply voltage: 4.4 V to 16 V

Supply range is 4.4 V to 16 V. Quiescent current is 2.4 mA per amplifier.

For new designs or BOM replenishment, the part remains in standard production and is sourced through our independent distribution channel.

Frequently asked questions

Is TLC2272CP a rail-to-rail op amp?

Yes, the TLC2272CP has a rail-to-rail output stage, allowing the output to swing close to both supply rails. The input is not rail-to-rail.

What is the replacement for TLC2272CP?

Texas Instruments has not announced a direct replacement for the TLC2272CP. For a surface-mount alternative with higher bandwidth, the TLV9362IDDFR (10.6 MHz, 25 V/µs, 4.5 V minimum supply) is a functional peer, but it is not pin-compatible — the TLV9362 is in a different package and has a different supply minimum. Verify your board layout and supply rail before substituting.