Skip to main content
Texas Instruments TLC2262CD — Memory (DRAM / SRAM / Flash / EEPROM)
Texas Instruments

TLC2262CD CMOS Dual Rail-to-Rail Op-Amp, 730 kHz, 8-SOIC

MPNTLC2262CD
End of Life

Texas Instruments LinCMOS™ series, TLC2262CD, CMOS dual operational amplifier, rail-to-rail output, 730 kHz gain bandwidth, 0.55 V/µs slew rate, 4.4 V to 16 V supply, 425 µA supply current, 8-SOIC package, 0°C to 70°C operating temperature.

$2.54Ref. price · indicative, final on quote
TLC2262CD datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TLC2262CD Technical Specifications
ParameterValue
SeriesLinCMOS™
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeCMOS
Voltage - input offset300 µV
Voltage - supply span4.4 V
Current - supply425µA (x2 Channels)
Current - input bias1 pA
Current - output (Channel)50 mA
Operating temperature0°C ~ 70°C
Gain bandwidth product730 kHz
PackageTube
Slew rate0.55V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

Low power and high input impedance

At 425 µA for both amplifiers, this part fits battery-powered or channel-dense boards where every milliamp counts. The 1 pA input bias current means you can use megaohm feedback resistors without offset errors from bias current — handy for precision integrators or long-time-constant filters. Output can source or sink 50 mA per channel, enough to drive a modest load or a reference input directly.

Sourcing and lifecycle reality

The TLC2262CD carries an Active lifecycle status and is ROHS3 compliant. No last-time-buy notice on record. It remains a viable BOM line for both new designs and sustaining production. Sourced through independent distribution; availability and current pricing confirmed at quote time against an RFQ. No immediate supply risk, but as with any active CMOS op-amp, keep an eye on TI's PCN feed for package or wafer-fab changes.

Frequently asked questions

Does TLC2262CD have rail-to-rail output?

Yes, the TLC2262CD has rail-to-rail output stages, allowing the output voltage to swing close to both supply rails.

What are the equivalent alternatives to TLC2262CD?

For a higher-speed single-channel alternative, the TLV9351IDCKR offers 3.5 MHz GBW and 20 V/µs slew rate in a tiny package. For a dual-channel upgrade with wider temperature range, the TLV9362IDDFR provides 10.6 MHz GBW and 25 V/µs slew rate, rated -40°C to 125°C. For a quad-channel CMOS op-amp, the OPA4374AIPWT gives 6.5 MHz GBW and 5 V/µs slew rate in a 14-pin package.