Dual CMOS op-amp with 730 kHz GBW and 0.55 V/µs slew rate
The TLC2262AIDR is a dual CMOS operational amplifier from Texas Instruments' LinCMOS™ series, offering a gain bandwidth product of 730 kHz and a slew rate of 0.55 V/µs. It operates from a single or split supply spanning 4.4 V to 16 V, draws 425 µA per channel, and delivers rail-to-rail output swing — making it a fit for battery-powered or low-voltage signal chains where headroom matters. The input bias current sits at 1 pA typical, and the input offset voltage is 300 µV, which keeps DC errors low in high-impedance sensor interfaces or precision integrators.
Supply range and temperature grade for field deployment
Rated for -40°C to 125°C operating temperature, the TLC2262AIDR covers industrial and automotive ambient conditions without derating — no lab bench required for a swap in a control cabinet or under-hood module. The 4.4 V minimum supply means it runs from a single lithium cell or a 5 V rail with margin; the 16 V maximum covers 12 V automotive systems and industrial 15 V rails. Packaged in an 8-SOIC (3.90 mm width), the footprint matches the standard SO-8 land pattern — reworkable with a soldering iron and hot-air pencil on site.
Sourcing and compliance reality
Available in Tape & Reel or Cut Tape options for the 8-SOIC package; quoted to order against the BOM quantity through independent distribution.