Texas Instruments LinCMOS™ series TLC2252AID, dual general-purpose op amp, 210 kHz gain bandwidth, 0.12 V/µs slew rate, 80 µA supply per channel, rail-to-rail output, 4.4 V to 16 V supply, -40°C to 125°C, 8-SOIC.
| Parameter | Value |
|---|---|
| Series | LinCMOS™ |
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 200 µV |
| Voltage - supply span | 4.4 V |
| Current - supply | 80µA (x2 Channels) |
| Current - input bias | 1 pA |
| Current - output (Channel) | 50 mA |
| Operating temperature | -40°C ~ 125°C (TA) |
| Gain bandwidth product | 210 kHz |
| Package | Tube |
| Slew rate | 0.12V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 2 |
No exposed thermal pad — the 50 mA per-channel output current stays within the SOIC's junction-to-ambient limits for most signal-conditioning loads. MSL level is not listed in this record, but SOIC-8 parts typically ship at MSL 1 or 3; verify the floor-life rating on the reel label before reflow.
Yes — the rail-to-rail output stage and 4.4 V minimum supply voltage allow single-supply operation from 5 V or higher. The input common-mode range is not rail-to-rail, so verify the input signal stays within the supply rails for the intended configuration.
The difference is the shipping medium: TLC2252AID ships in a Tube, while TLC2252AIDR ships in Tape & Reel. The silicon, package, and electrical specifications are identical.