Hermetic dual op-amp for harsh environments
Rail-to-rail output swing and a 2.9 V/µs slew rate let it drive ADC inputs or filter stages without headroom loss, while the 1.9 MHz gain-bandwidth product keeps loop gain up through the audio band.
Supply range and drive capability
Operates from a single 4.6 V to 16 V supply — compatible with 5 V and 12 V rails common in mixed-signal backplanes. Each channel delivers 50 mA output current, enough to drive a small relay or an analog meter directly. Input offset voltage is 2 mV typical, and input bias current is 4 µA — the CMOS front end keeps DC errors low enough for precision set-points in temperature or pressure transmitters without external trimming.
Active production, ceramic package
The 8-CDIP package is a through-hole hermetic ceramic body, 0.300-inch wide, 7.62 mm. For a BOM line needing a dual CMOS op-amp in a sealed ceramic package with military temperature range, this part is sourced per RFQ — no stock-holding claim, but the active status means TI continues to manufacture and support it.