Texas Instruments TLC2202CPS, dual CMOS rail-to-rail output op-amp, 1.9 MHz gain bandwidth, 2.7 V/µs slew rate, 4.6–16 V supply, 8-SOIC surface mount, 0°C to 70°C.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting type | Surface Mount |
| Amplifier type | CMOS |
| Voltage - input offset | 2 mV |
| Voltage - supply span | 4.6 V |
| Current - supply | 5.6mA (x2 Channels) |
| Current - input bias | 4 µA |
| Current - output (Channel) | 50 mA |
| Operating temperature | 0°C ~ 70°C |
| Gain bandwidth product | 1.9 MHz |
| Package | Tube |
| Slew rate | 2.7V/µs |
| Case | 8-SOIC (0.209\", 5.30mm Width) |
| Number of circuits | 2 |
The TLC2202CPS: Supply span runs from 4.6 V up to 16 V. The 8-SO package (0.209" wide, 5.30 mm body) is a common footprint.
The 1.9 MHz GBW and 2.7 V/µs slew rate suit audio signal conditioning, active filters, sensor buffering, and slow control loops. Each channel can source or sink 50 mA. Input offset voltage is 2 mV, input bias current is 4 µA.
Yes. The supply voltage range spans 4.6 V to 16 V, so a single 5 V rail is within spec. The rail-to-rail output stage allows the output to swing close to the 5 V rail and ground, maximizing dynamic range in single-supply circuits.