Skip to main content
Log in
TLC071IDR

TLC071IDR Texas Instruments Op Amp – 10 MHz, 19 V/µs, 8-SOIC

MPNTLC071IDR
End of Life

Texas Instruments TLC071IDR, general-purpose op amp, single circuit, 10 MHz gain bandwidth, 19 V/µs slew rate, 8-SOIC surface-mount package, -40°C to 125°C temperature range.

$1.66Ref. price · indicative, final on quote
Texas Instruments TLC071IDR datasheet (PDF)
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TLC071IDR specifications
ParameterValue
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset390 µV
Voltage - supply span4.5 V
Current - supply2.1mA
Current - input bias1.5 pA
Current - output (Channel)57 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product10 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate19V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits1

Product details

The TLC071IDR is a single-channel general-purpose operational amplifier from Texas Instruments, built for signal conditioning tasks that need a 10 MHz gain bandwidth and a 19 V/µs slew rate without rail-to-rail output. The 1.5 pA input bias current keeps DC errors low in high-impedance sensor interfaces. It operates from a single or split supply spanning 4.5 V to 16 V total, and the 2.1 mA supply current per channel balances speed with power budget for multi-channel boards.

Temperature range and package for board fit

The 8-SOIC package (0.154-inch body width) is a common footprint that reflow solders without special profiles and mates with standard SOIC-8 land patterns.

Frequently asked questions

How can I order TLC071IDR or check availability?

Submit an RFQ with your target quantity; we source it per order and confirm pricing and lead time at quote.

What is the difference between TLC071IDR and TL071?

The TLC071IDR is a newer BiCMOS design with a 10 MHz gain bandwidth and 19 V/µs slew rate, versus the classic TL071's 3 MHz and 13 V/µs typical. The TLC071 also draws lower supply current (2.1 mA vs ~2.5 mA) and has a much lower input bias current (1.5 pA vs 65 pA). Both are single op amps in 8-SOIC, but the TLC071IDR is better suited for high-impedance or higher-speed signal paths.

Can TLC071IDR be used in single-supply applications?

Yes. The supply range of 4.5 V to 16 V allows single-supply operation from a 5 V or 12 V rail. The input common-mode range extends to the negative rail, but the output does not swing rail-to-rail — expect a typical output swing within about 1.5 V of each rail under load.

What is the equivalent part for TLC071IDR?

Within TI's portfolio, the TLV9351IDCKR is a single-channel alternative with a 3.5 MHz bandwidth and 20 V/µs slew rate, also in a small SOT-23 package. For a dual-channel option, the TLV9362IDDFR provides 10.6 MHz bandwidth and 25 V/µs slew rate. Neither is a direct drop-in — verify the pinout and package before substituting.