Skip to main content
Texas Instruments TL432AIDBVRE4 — Analog & Data Acquisition

TL432AIDBVRE4 Shunt Reference, 2.495 V ±1%, SOT-23-5

MPNTL432AIDBVRE4
Obsolete

Texas Instruments TL432AIDBVRE4, adjustable shunt voltage reference, 2.495 V min output, ±1% tolerance, 100 mA output, 700 µA cathode current, SC-74A/SOT-753 package, SOT-23-5, -40°C to 85°C.

Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TL432AIDBVRE4 specifications
ParameterValue
Output typeAdjustable
MountingSurface Mount
Reference typeShunt
Voltage - output36 V
Voltage - output (Min (Fixed))2.495V
Output current100 mA
Current - cathode700 µA
Operating temperature-40°C~85°C(TA)
PackageTape & Reel (TR)
Tolerance±1%
CaseSC-74A, SOT-753

Product details

2.495 V reference with ±1% tolerance

The TL432AIDBVRE4: Adjustable shunt voltage reference with a minimum output of 2.495 V and ±1% tolerance. Output adjustable up to 36 V via an external resistor divider.

Output drive and bias requirements

Rated for 100 mA continuous output current with a minimum cathode current of 700 µA. The 700 µA floor sets the minimum bias current needed to maintain regulation — below this the reference may drop out of its specified accuracy band. The 100 mA ceiling defines the maximum shunt current the device can sink while holding the output voltage within tolerance.

Supplied in an SOT-23-5 package, a common footprint for small-signal shunt references.

Frequently asked questions

Where can I buy TL432AIDBVRE4?

TL432AIDBVRE4 is sourced through independent distribution. No stock-holding claim is made; each order is quoted against the BOM quantity.

What is the difference between TL432 and TL432AIDBVRE4?

The TL432AIDBVRE4 is a specific ordering code within the TL432 family. The key difference is the ±1% tolerance grade (the base TL432 is typically ±2%) and the SOT-23-5 package. The TL432AIDBVRE4 also carries an Obsolete status, while some TL432 variants remain active.