Skip to main content
Texas Instruments TL3472ID — Memory (DRAM / SRAM / Flash / EEPROM)
Texas Instruments

TL3472ID Op-Amp, 4 MHz, 13V/µs, Dual, 8-SOIC

MPNTL3472ID
End of Life

Texas Instruments TL3472ID, dual general-purpose operational amplifier, 4 MHz gain bandwidth, 13V/µs slew rate, 4 V to 36 V supply, surface mount 8-SOIC package, -40°C to 105°C operating temperature.

$0.96Ref. price · indicative, final on quote
TL3472ID datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TL3472ID Technical Specifications
ParameterValue
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset1 mV
Voltage - supply span36 V
Current - supply3.5mA (x2 Channels)
Current - input bias100 nA
Current - output (Channel)34 mA
Operating temperature-40°C ~ 105°C (TA)
Gain bandwidth product4 MHz
PackageTube
Slew rate13V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

Texas Instruments TL3472ID is a dual-channel general-purpose operational amplifier in an 8-SOIC surface-mount package. It delivers a 4 MHz gain-bandwidth product and a 13V/µs slew rate, with a supply range spanning 4 V to 36 V. The -40°C to 105°C temperature grade suits industrial control, motor-drive signal conditioning, and sensor interface boards. Each channel draws 3.5 mA quiescent current and can source or sink 34 mA.

The TL3472ID carries an Active product status and is ROHS3 compliant. There is no last-time-buy notice or obsolescence risk on this line. The part is available through independent distribution and can be quoted to order against an RFQ.

Frequently asked questions

Is TL3472ID a drop-in replacement for LM358?

Not directly. The TL3472ID shares the same dual op-amp function and 8-SOIC footprint as the LM358, but its 4 MHz GBW and 13V/µs slew rate are significantly faster. The LM358 typically runs at 1 MHz and 0.6V/µs. Pinout is the same, but the higher speed may require layout changes to avoid oscillation. Verify stability in your feedback network before substituting.

Is TL3472ID compatible with single supply?

Yes. The TL3472ID operates from a single supply between 4 V and 36 V. It is not a rail-to-rail output part, so the output swing is limited to roughly 1.5 V from each rail under typical loads.

What is the replacement for TL3472ID?

There is no single official replacement from TI. The TLV9362IDDFR is a more recent dual op-amp with rail-to-rail output, 10.6 MHz GBW, and 25V/µs slew rate, but it operates from 4.5 V minimum supply and comes in a different package option. For a direct drop-in with similar speed, the TL3472ID remains active and available.