Skip to main content
Texas Instruments TL33072AP — Logic ICs
Texas Instruments

TL33072AP General Purpose Op-Amp, 4.5 MHz GBW, 13 V/µs

MPNTL33072AP
End of Life

Texas Instruments TL33072AP, General Purpose Amplifier, 2 Circuits, 8-DIP (0.300", 7.62mm), Through Hole, 4.5 MHz Gain Bandwidth, 13 V/µs Slew Rate, 4 V to 44 V Supply, -55°C to 105°C.

$0.67Ref. price · indicative, final on quote
TL33072AP datasheet
Packaging8-DIP (0.300", 7.62mm)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TL33072AP Technical Specifications
ParameterValue
Mounting typeThrough Hole
Amplifier typeGeneral Purpose
Voltage - input offset300 µV
Voltage - supply span44 V
Current - supply400µA (x3 Channels)
Current - input bias1 pA
Current - output (Channel)30 mA
Operating temperature-55°C ~ 105°C (TA)
-3db bandwidth200 kHz
Gain bandwidth product4.5 MHz
PackageBulk
Slew rate13V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

With a supply span from 4 V to 44 V, this op-amp works on single 5 V or 12 V rails as well as traditional ±15 V split supplies. The -55°C to 105°C temperature rating means it can sit in an engine bay or a satellite power conditioner without derating. Input bias current is 1 pA (typical), and input offset voltage is 300 µV — both fine for general-purpose signal conditioning, level shifting, or active filtering.

Through-hole DIP — rework-friendly and socketable

The 8-DIP (0.300", 7.62mm) through-hole package is a rework technician's friend. The 100-mil pin pitch fits standard prototyping boards and DIP sockets, so you can swap it without lifting a pad.

This part is RoHS non-compliant (lead-bearing), so verify your assembly's exemption status if you are shipping into RoHS-regulated markets.

Frequently asked questions

What is the equivalent or replacement for TL33072AP?

No direct pin-compatible drop-in replacement is listed in the manufacturer's cross-reference. The TLV9351IDCKR (single, 3.5 MHz, 20 V/µs) and TLV9362IDDFR (dual, 10.6 MHz, 25 V/µs) are surface-mount parts with narrower supply ranges (4.5 V max) and rail-to-rail outputs — they are not drop-in substitutes for the through-hole DIP or the wide supply span.

Can TL33072AP be used as a drop-in replacement for TL072?

The TL33072AP shares the same 8-DIP pinout as the classic TL072 and operates over a similar supply range. However, the TL33072AP has a lower gain-bandwidth (4.5 MHz vs 3 MHz typical for TL072) and a higher slew rate (13 V/µs vs 13 V/µs typical for TL072). Verify the compensation and load conditions in your circuit — the TL33072AP is a functional upgrade in speed but not an exact parametric match.