What the 900 kHz GBW buys you in a general-purpose dual op-amp
Its 900 kHz gain-bandwidth product and 0.4 V/µs slew rate cover the usual sensor conditioning, signal buffering, and active-filter needs up to the low-audio range without wasting power — each channel draws 700 µA supply current. The 3 V to 32 V supply span means it can sit on a 5 V or 24 V industrial rail without a secondary regulator.
Supply voltage and temperature — fit check for the BOM
The 3 V minimum supply lets this part run from a single lithium cell or a 3.3 V rail, while the 32 V maximum covers 24 V industrial buses with margin. Input offset voltage is 500 µV typical, and input bias current is 20 nA — adequate for non-precision transducer interfaces where a few millivolts of offset is acceptable.