Skip to main content
Log in
Texas Instruments TL084QDRG4 — Analog & Data Acquisition

TL084QDRG4 Automotive JFET Op-Amp, 13V/µs Slew Rate

MPNTL084QDRG4
End of Life

Texas Instruments TL084QDRG4, Automotive AEC-Q100, quad JFET-input op-amp, 3 MHz gain bandwidth, 13V/µs slew rate, 10-30 V supply, -40°C to 125°C, 14-SOIC package.

Texas Instruments TL084QDRG4 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TL084QDRG4 specifications
ParameterValue
SeriesAutomotive, AEC-Q100
MountingSurface Mount
Amplifier typeJ-FET
Voltage - input offset3 mV
Voltage - supply span30 V
Current - supply1.4mA (x4 Channels)
Current - input bias30 pA
Current - output (Channel)10 mA
Operating temperature-40°C~125°C
Gain bandwidth product3 MHz
PackageTape & Reel (TR)
Slew rate13V/µs
Case14-SOIC (0.154\", 3.90mm Width)
Number of circuits4

Product details

AEC-Q100 JFET quad op-amp for automotive signal chains

Slew rate and bandwidth — signal conditioning ceiling

With a 13V/µs slew rate and 3 MHz gain-bandwidth product, this part handles audio-band signals and slow sensor outputs cleanly. The 10 mA per-channel output current drives ADC input stages or modest loads without a separate buffer. Supply range spans 10 V to 30 V single or split supply.

14-SOIC package — rework and footprint notes

Surface-mount only; no through-hole variant in this suffix.

No stock-holding claim; quoted per BOM quantity.

Frequently asked questions

Is TL084QDRG4 automotive qualified?

Yes, the TL084QDRG4 is listed under the Automotive, AEC-Q100 series, meaning it is qualified for automotive applications per the AEC-Q100 stress test qualification for integrated circuits.

What is the slew rate of TL084QDRG4?

The slew rate is 13V/µs, paired with a 3 MHz gain-bandwidth product — suitable for audio-band and sensor signal conditioning up to several hundred kHz.