Skip to main content
Log in
Texas Instruments TL082CPSRG4 — Analog & Data Acquisition

Texas Instruments TL082CPSRG4 JFET Op-Amp, 3 MHz, 13V/µs

MPNTL082CPSRG4
End of Life

Texas Instruments TL082CPSRG4, JFET dual operational amplifier, 3 MHz gain bandwidth, 13V/µs slew rate, 1.4mA supply per two channels, 10V to 30V supply, 8-SOIC surface mount, 0°C to 70°C.

Texas Instruments TL082CPSRG4 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TL082CPSRG4 specifications
ParameterValue
MountingSurface Mount
Amplifier typeJ-FET
Voltage - input offset3 mV
Voltage - supply span30 V
Current - supply1.4mA (x2 Channels)
Current - input bias30 pA
Current - output (Channel)10 mA
Operating temperature0°C~70°C
Gain bandwidth product3 MHz
PackageTape & Reel (TR)
Slew rate13V/µs
Case8-SOIC (0.209\", 5.30mm Width)
Number of circuits2

Product details

JFET dual op-amp, 3 MHz GBW, 13V/µs slew rate

It delivers a 3 MHz gain-bandwidth product and a 13V/µs slew rate, making it a solid choice for audio preamps, active filters, and general-purpose signal conditioning where input bias current needs to stay low — 30 pA typical.

Supply range and current draw

Runs on a supply span from 10 V to 30 V, single or split rail. Quiescent current is 1.4 mA for both amplifiers combined — that is 0.7 mA per channel, which keeps the thermal budget low in a multi-op-amp board.

The supplier device package is 8-SO — same footprint as the standard SOIC-8.

Frequently asked questions

Is TL082CPSRG4 equivalent to TL082CP?

The TL082CPSRG4 and TL082CP share the same TL082 amplifier core — same JFET input, same 3 MHz GBW, same 13V/µs slew rate. The difference is the package: the CPSRG4 is an 8-SOIC surface-mount part on tape and reel, while the CP is a PDIP through-hole part. They are not pin-compatible without a board change.

What is the difference between TL082CPSR and TL082CPSRG4?

The TL082CPSR and TL082CPSRG4 are electrically identical — same JFET dual op-amp, same 3 MHz GBW, same 13V/µs slew rate. The 'G4' suffix on the CPSRG4 indicates a RoHS-compliant, halogen-free finish. The CPSR may be an earlier non-G4 variant; the G4 is the current RoHS-compliant version.