Skip to main content
Texas Instruments TL082CP/PB — Analog & Data Acquisition

TL082CP/PB JFET Op-Amp, 13V/µs Slew Rate, 8-PDIP

MPNTL082CP/PB
Obsolete

Texas Instruments TL082CP/PB, dual JFET-input operational amplifier, 4 MHz gain bandwidth, 13V/µs slew rate, 8-PDIP through-hole package, 0°C–70°C commercial temperature range.

$1.4900Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TL082CP/PB specifications
ParameterValue
MountingThrough Hole
Amplifier typeJ-FET
Voltage - input offset5 mV
Voltage - supply span36 V
Current - supply3.6mA (x2 Channels)
Current - input bias50 pA
Current - output (Channel)17 mA
Operating temperature0°C~70°C
Gain bandwidth product4 MHz
PackageTube
Slew rate13V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

Dual JFET op-amp in 8-pin DIP

The TL082CP/PB is a dual JFET-input operational amplifier from Texas Instruments, offering a 4 MHz gain-bandwidth product and a 13V/µs slew rate.

13V/µs slew rate — signal fidelity in audio and fast-settling loops

With a 13V/µs slew rate and 4 MHz gain-bandwidth, this op-amp handles audio-band signals and moderate-speed control loops without significant slew-induced distortion. The JFET input stage keeps input bias current at 50 pA, which matters when the source impedance is high — the bias current error across a 100 kΩ resistor is only 5 µV, negligible in most precision circuits.

Frequently asked questions

What is the replacement for TL082CP/PB?

No official replacement or successor is recorded for the TL082CP/PB. For a pin-compatible through-hole alternative, consider the TL072CP — same 8-pin DIP footprint, JFET input, and similar 13V/µs slew rate, but with lower noise (18 nV/√Hz vs 25 nV/√Hz typical). Verify the supply voltage and bandwidth requirements against your design before substituting.