Skip to main content
Log in
Texas Instruments TL082CJG — Analog & Data Acquisition

TL082CJG JFET Op-Amp, 3 MHz, 13V/µs, AEC-Q100, 8-CDIP

MPNTL082CJG
End of Life

Texas Instruments TL082CJG, dual JFET-input operational amplifier, 3 MHz gain bandwidth, 13V/µs slew rate, 30 pA input bias, AEC-Q100 qualified, 8-CDIP through-hole package, 0°C to 70°C operating temperature.

$2.0000Ref. price · indicative, final on quote
Texas Instruments TL082CJG datasheet (PDF)
Packaging8-CDIP (0.300", 7.62mm)
RoHSRoHS non-compliant
SeriesAutomotive, AEC-Q100
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TL082CJG specifications
ParameterValue
MountingThrough Hole
Amplifier typeJ-FET
Voltage - input offset3 mV
Voltage - supply span30 V
Current - supply1.4mA (x2 Channels)
Current - input bias30 pA
Current - output (Channel)10 mA
Operating temperature0°C ~ 70°C
Gain bandwidth product3 MHz
GradeAutomotive
PackageBulk
Slew rate13V/µs
QualificationAEC-Q100
Case8-CDIP (0.300\", 7.62mm)
Number of circuits2

Product details

What this JFET op-amp brings to an automotive BOM

Each of the two channels draws 1.4 mA supply current. The JFET input stage holds input bias current to 30 pA and input offset voltage to 3 mV. Output current is rated at 10 mA per channel. The AEC-Q100 qualification and Automotive grade make this part suitable for under-hood and chassis-domain signal conditioning, sensor buffering, and actuator drive stages where JFET inputs are preferred for their low bias current and high input impedance.

Package and mounting — through-hole ceramic DIP

The 8-CDIP (0.300", 7.62 mm) ceramic dual-in-line package is a through-hole footprint. It mates with standard 8-pin DIP sockets or can be soldered directly into plated through-holes.

Sourcing and lifecycle — active, but RoHS non-compliant

Note that it is marked RoHS non-compliant, which means it contains lead in the solder finish or ceramic body — a consideration for designs that must meet EU RoHS exemptions or are destined for regions with strict RoHS enforcement.

Frequently asked questions

Is TL082CJG qualified for automotive applications?

Yes, the TL082CJG carries AEC-Q100 qualification and is graded Automotive. This means it has passed the stress tests defined by the Automotive Electronics Council for reliability in automotive environments.

Is TL082CJG a drop-in replacement for TL082CP?

The TL082CJG shares the same dual JFET op-amp core and pinout as the standard TL082 series, but it is packaged in a ceramic CDIP rather than a plastic DIP. The ceramic package has different thermal and mechanical characteristics, so verify socket compatibility and solder profile before substituting. The electrical specifications are similar, but the AEC-Q100 qualification is an added advantage for automotive designs.

Is TL082CJG compatible with standard 8-pin DIP sockets?

Yes, the 8-CDIP package has the same 0.300" (7.62 mm) row spacing and 0.1" (2.54 mm) pin pitch as a standard 8-pin DIP. It fits standard DIP sockets and through-hole footprints.