Skip to main content
Log in
TL082CDE4

TL082CDE4 JFET Dual Op-Amp, 13 V/µs Slew Rate, 8-SOIC

MPNTL082CDE4
Active

Texas Instruments TL082CDE4, JFET-input dual operational amplifier, 3 MHz gain bandwidth, 13 V/µs slew rate, 30 pA input bias, 0°C to 70°C, 8-SOIC surface-mount package.

$1.0000Ref. price · indicative, final on quote
Texas Instruments TL082CDE4 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TL082CDE4 specifications
ParameterValue
MountingSurface Mount
Amplifier typeJ-FET
Voltage - input offset3 mV
Voltage - supply span30 V
Current - supply1.4mA (x2 Channels)
Current - input bias30 pA
Current - output (Channel)10 mA
Operating temperature0°C~70°C
Gain bandwidth product3 MHz
PackageBulk
Slew rate13V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

JFET input stage — why it matters for your signal chain

Slew rate and bandwidth — what 13 V/µs and 3 MHz buy you

For a 10 V peak-to-peak output swing, the 13 V/µs rate supports full-power bandwidth up to roughly 200 kHz — adequate for audio line drivers, active filters, and control-loop compensation in the tens-of-kHz range. The 3 MHz GBW sets the closed-loop bandwidth at gains above unity; at a gain of 10 the small-signal bandwidth drops to about 300 kHz.

The amplifier operates from a split supply spanning ±5 V to ±15 V (10 V to 30 V total), covering the standard ±15 V industrial rail. The 1.4 mA supply current per channel (2.8 mA total) keeps the thermal load low in the 8-SOIC package.

It is specified for indoor, temperature-controlled environments — bench instruments, audio gear, consumer electronics, and office equipment.

Frequently asked questions

Is TL082CDE4 compatible with TL082CP?

The TL082CDE4 and TL082CP share the same JFET dual op-amp core and the same pinout. The difference is the package: the CDE4 suffix indicates an 8-pin SOIC surface-mount package, while the CP suffix is an 8-pin PDIP through-hole package. They are electrically equivalent but not footprint-compatible.

What are the equivalent op amps to TL082CDE4?

Pin-compatible dual JFET op-amps in the same 8-SOIC footprint include the TL082ID (industrial temperature range) and the TL082CD (same commercial range, different ordering code). The NJM082D and MC34082 are functional equivalents but verify supply voltage and slew rate against your design requirements.