3 MHz GBW with 13 V/µs slew — the signal bandwidth ceiling
The 30 pA input bias current, typical of JFET stages, lets it interface directly with high-impedance sources like photodiodes or piezo sensors without an external buffer.
Supply range and current — what the rails need
The part runs on a supply span from 10 V to 30 V, which covers both single-supply (10 V to 30 V) and split-supply (±5 V to ±15 V) configurations. Each of the two channels draws 1.4 mA quiescent current, so the total supply budget is 2.8 mA plus the output load. The 10 mA per-channel output current rating is enough to drive a typical ADC input or a 2 kΩ load to near-rail swing, but not a 50 Ω transmission line.
For industrial or automotive applications that see -40°C or +85°C, look at the TL082I or TL082Q industrial-grade siblings in the same family.
SOIC-8 package — rework and footprint
The SOIC-8 is a rework-friendly package — a hot-air station set to 300°C with a fine nozzle lifts the part cleanly without lifting pads, provided the board is dry (MSL-1 typical for this package family).